Wavetek Wandel Goltermann CLI-1450, Operation Manual

Page: 50 / 102

2-7
PRINTING THE SCREEN PRINTING THE SCREEN PRINTING THE SCREEN PRINTING THE SCREEN PRINTING THE SCREEN
You can print the entire screen at any time by pressing the SHIFT +
keys. A bar graph appears indicating the status of the printout.
WARNING INDICATORS WARNING INDICATORS WARNING INDICATORS WARNING INDICATORS WARNING INDICATORS
If the current measurement is inaccurate due to an out-of-range
condition or a hardware failure, your CLI-1450 warns you by display-
ing one of the following warning indicators:
Over-range Over-range Over-range Over-range Over-range
The leakage level is above the measurement range of the
instrument.
Under-range Under-range Under-range Under-range Under-range
The leakage level is below the measurement range of the
instrument.
Error Error Error Error Error
A hardware problem exists. If this condition persists, the unit
may need repair.
Find and Fix Find and Fix Find and Fix Find and Fix Find and Fix
Reminds the operator that the leakage measurement obtained in
the Find and Fix mode is not as accurate as the Measure mode.
Note Note Note Note Note
The battery level is not monitored when in LEAKAGE mode.
Note Note Note Note Note
The Shutoff Time-out feature is disabled during LEAKAGE mode.
INSTALLATION
The INSTALLATION mode allows you to easily check the channels
that you have just installed and verify that they are within limits. If
you have configured channel packages, you can tell your CLI-1450
which packages the subscriber has ordered and it will display only
those channels.