Wavetek Wandel Goltermann CLI-1450, Operation Manual

Page: 11 / 102

1-4
executed immediately or scheduled over a period of time. To
conserve battery life, CLI-1450 shuts itself off between scheduled
intervals. When configuring an Auto Test, you can record information
about the location at which the test is being performed. Files can be
created for commonly tested locations so you need only enter the
information once.
Auto Tests results are time, date, and temperature stamped and can be
viewed on the LCD screen. Limits are applied to the measurement
data with out-of-tolerance conditions concisely indicated. You can
print a test report for each interval or a comprehensive 24 hour report
that summarizes data collected from up to four intervals. Auto Test
result files can be uploaded to StealthWare (Version 3.0).
MULTIPLE CHANNEL PLANS
The CLI-1450 stores channel plans that you have built and edited.
This is convenient if you use your CLI-1450 for more than one plant.
You can quickly select the correct channel plan for the plant at which
you are working.
DOCKING STATION OPTION
The DS-1 docking station simplifies connection to a vehicle antenna
and power source. Your CLI-1450 automatically recharges when
resting in the docking station. The adjustable arm makes it easy to
view the display from the driver’s seat.
REVERSE INGRESS SCAN
Reverse ingress scan is a feature of the sub-band option for models
CLI-1450 and MS1300. A continuous fast scan is performed that
permits the installer to see ingress signals in the reverse band. The
operator can set the start and stop frequencies of the scan, the interval,
and the scan rate (dwell). In use, once the installation is complete, the
meter can be connected to the tap end of the drop and the reverse scan
mode selected. A user programmable limit can be set for simple
identification of problem drops. To check for intermittent ingress, the
meter can be set in the peak hold mode to catch transient signals. The
screen can be saved for later viewing, printing, or upload to