Wavetek Wandel Goltermann CLI-1450, Operation Manual

Page: 25 / 102

1-18
EDIT TEST POINTS EDIT TEST POINTS EDIT TEST POINTS EDIT TEST POINTS EDIT TEST POINTS
Your CLI-1450 is capable of performing tests at various locations
including; SUBSCRIBER DROP, GROUND BLOCK, TAP, and
USER DEFINED (or CUSTOM). Each test point has its own set of
limits that you can edit. Press the
key to edit the test points. A list
of available test points appears.
You can enable or disable each test point in the list. When a test point
is disabled, you cannot use it when performing tests. Use the up or
down arrow to highlight the desired test point. If the highlighted test
point is disabled, you can enable it by pressing the soft key. A
check mark appears in the left-hand column to indicate when a test
point is enabled. If the test point is already enabled, pressing the
soft key disables it.
T i p T i p T i p T i p T i p
You can change the name of the USER DEFINED (CUSTOM) test
point. Notice that the edit box appears when this test point is high-
lighted. When you press the
key, the edit box becomes active and
you can enter any name up to fifteen characters long. Be sure to press
the
key when finished to terminate your entry.
You can edit the limits for the highlighted test point by pressing the
soft key. The limits appear on the screen. Scroll down the list to
see all the limits.