Wavetek Wandel Goltermann CLI-1450, Operation Manual

Page: 57 / 102

2-14
Use the left and right arrows to tune your CLI-1450. The frequency
increments or decrements by the step size that you have specified in
the Measurement configuration (see FREQUENCY TUNING STEP
SIZE). You can also use the numeric entry keys to tune directly to the
frequency desired.
MEASUREMENT HOLD MEASUREMENT HOLD
MEASUREMENT HOLD MEASUREMENT HOLD MEASUREMENT HOLD
You can freeze the level measurement at any time by pressing the
SHIFT +
keys. The measurement is retained even if the cable is
disconnected from the input port. Notice that the mode icon in the
upper left-hand portion of the screen flashes when the measurement is
on hold. Press the SHIFT +
keys again to release the hold. The
hold is also released when you tune to a different channel or fre-
quency. The measurement is not retained when another mode is
selected or the CLI-1450 is shut off.
PRINTING THE SCREEN PRINTING THE SCREEN
PRINTING THE SCREEN PRINTING THE SCREEN PRINTING THE SCREEN
You can print the entire screen at any time by pressing the SHIFT +
keys. A bar graph appears indicating the status of the printout.
T i p T i p
T i p T i p T i p
If you are using your CLI-1450 at a location where it is not convenient
to connect to a printer (such as on a pole), you can put the measure-
ment on hold until you are able to access the printer (see MEASURE-
MENT HOLD).