Waveshare WIFI232-B2 User Manual Download Page 72

Page: 72 / 102

WIFI232-B2 User Manual

102

Format:

AT+EPHY=<on/off><CR>

+ok<CR><LF><CR><LF>

Parameters:

To reduce the consumption, the Ethernet port is closed by default. With this

command, the Ethernet port will be opened immediately, and it is invalid after restart. If
you want to open the Ethernet permanently, please use he command AT+FRPHY=on.
We recommend you to close the port for reducing consumption.

Use command AT+FVEW=disable/enable and switch the module to work at LAN

port (disable) or WAN port (enable). It is effective after restart.

5.2.1.30 AT+FUDLX

Function:

Enable/Disable RS485

Format:

AT+FUDLX=<on/off><CR>

+ok<CR><LF><CR><LF>

Note:

This command is used to enable or disable the RS485 function. RS485 is default

closed. The control pin of RS485 is RTS. The setting is effective after restore factory
setting.

5.2.1.31 AT+MMID

Function:

Set ID of module

Format:

AT+MMID=<ID><CR>

+ok<CR><LF><CR><LF>

Parameters:



ID: 0~65535

5.2.1.32 AT+IDFIR

Function:

Enable/Disable

“Send an ID when module connection is established” function

Format:

Summary of Contents for WIFI232-B2







































































































Search results

Summary of Contents for WIFI232-B2

Reviews:

Related manuals for WIFI232-B2

Brands by name

Popular brands

Waveshare WIFI232-B2, User Manual

Search results

Summary of Contents for WIFI232-B2

Reviews:

Related manuals for WIFI232-B2

Brands by name

Popular brands