WIFI232-B2 User Manual
84
/
102
key: password
if encry=WEP-H: 10bits or 26bbits (HEX)
if encry=WEP-A: 5bits or 13 bits (ASCII)
>8 bits and <64 bits
Note:
The setting is valid at STA mode, it is effective after restart module. Can be set at
AP mode as well.
5.2.1.59 AT+WSQY
Function:
Set/Query the critical value (percentage) of three STA parameters setting
Format:
Query Operation:
AT+WSQY<CR>
+ok=<ret><CR><LF><CR><LF>
Set Operation:
AT+WSQY=<ret><CR>
+ok<CR><LF><CR><LF>
Parameters:
ret: percentage of signal strength.
Note:
If you set the parameters to 100, module will not switch to WIFI automatically. If
you use only one parameter, please set the parameters to 100.
5.2.1.60 AT+TCPDPEN
Function:
Enable/Disable sockets distribute function
Format:
Query Operation:
AT+TCPDPEN<CR>
+ok=<sta.><CR><LF><CR><LF>
Set Operation:
AT+TCPDPEN=<sta.><CR>
+ok<CR><LF><CR><LF>
Parameters:
on: The sockets distribute function is enable
