Chapter 4: Using the Remote Control Console
13
e-mail gateway for Remote Control, the mail server (either POP3 or SMTP) credentials and log
setting, the device timeout settings, and the VNC settings.
The Server Setup page has the following options:
Wavelink Sync tab
Enable Sync
Enables or disables the Remote Control synchronization with the
Wavelink skins repository.
Schedule
Schedules when Remote Control syncs with the Wavelink skins
repository. The default value means that Remote Control will sync
daily at 1 AM. Use a cron expression format.
Skins Repository
The address for the Wavelink skins repository.
Wide Area tab
Host
The DNS name of the mail server.
Mail From
The address that will appear in the From field of the e-mail.
POP3 Host
The DNS name of the POP3 host.
User
The user name for the POP3 server.
Password
The password for the POP3 server.
Pop Before
SMTP
When this is enabled, Remote Control will try to use the POP3 server
before it attempts SMTP.
User
The user name for the SMTP server.
Password
The password for the SMTP server.
Port
The port used by the SMTP server.
Use Auth
Determines if authentication credentials are sent to the outgoing mail
server.
Debug Mail
Session
Enables or disables a Remote Control log for sending mail.
Timeouts tab
TCP
How long to wait (in milliseconds) before the TCP connection request
times out.
