Chapter 5: Configuring the Remote Control Client
21
NOTE:
If you do not have Java installed locally, click
Install Java
in the Configure column.
After installing Java, the
Configure
option will be available.
3
Depending on your browser and security settings, you may be prompted to trust the
Wavelink certificate. If you are prompted to select the program to use for opening the file,
choose
Java Web Start Launcher
from the list and click
OK
.
4
The
Configure Software Package
dialog box appears. Click
Next
.
5
Select
Client Configuration
from the list and click
Launch Config
.
The
Remote Control Client Configuration
dialog box appears.
6
Configure the options as desired.
7
Click
OK
to return to the
Configure Software Package
dialog box.
8
Click
Next
to save your changes.
9
Click
Finish
to return to the Web Console.
Configuring Client Settings from the Mobile Device
Before you can configure client settings from the mobile device, you must enable the
Allow
Client Configuration
option from the Remote Control Console (in the
Client
tab of the Client
Setup page). This allows the mobile device user to configure the connection type, policy
notification, password, and whether the device is allowed to sleep while connected. If you
disable the
Allow Client Configuration
option, the mobile device user will not be allowed to
access the client information on the mobile device.
For more information about enabling the
Allow Client Configuration
option and the
configurations available, see
Editing the Remote Control Package
on page 18.
NOTE:
Once you have configured the options from the device, the client will no longer
accept configuration changes from Avalanche. In order to push settings to the device from
Avalanche again, you should disable the
Allow Client Configuration
option or use the
Clearing Client Settings
on page 22 option.
The following settings are configurable from the device:
Connection
Type
Select to use either TCP/IP or ActiveSync to connect to mobile devices.