Chapter 5: Configuring the Remote Control Client
22
Policy
Select how Remote Control notifies the mobile device user that Remote Control
is establishing a connection.
Silent
indicates that the user will not be notified.
Notify
indicates that the user will see a text window on his device letting him
know that a connection has been established.
Prompt-Allow
will provide the user with a prompt to allow or deny the
connection. If the user does not respond, the connection will be allowed.
Prompt-Deny
will provide the user with a prompt to allow or deny the
connection. If the user does not respond, the connection will be denied.
Policy
Seconds
Select how long the notification or prompt will be displayed. If you selected
Prompt-Allow
or
Prompt-Deny
, this is the number of seconds Remote Control
will wait before establishing or denying the connection.
Password
A password to require Remote Control users to provide a password before
connecting to a mobile device.
Allow
Sleep
while
connected
Allows the mobile device to enter sleep mode while connected to Remote
Control. If you do not enable this option, Remote Control will not allow the
mobile device to enter sleep mode while connected.
To configure client settings from the mobile device:
1
Launch the Remote Control application on the mobile device.
2
Tap
File > Configure
.
The
Configure
dialog box appears.
NOTE:
If the
Allow Client Configuration
option is not enabled from the Remote Control
Console, the
Not Available
dialog box appears. The device user will not be able to access client
settings.
3
Configure the settings as desired.
4
Click
OK
.
The Remote Control client is updated with the new settings.
Clearing Client Settings
You can clear all client configuration settings using the
Clear Client Settings
option in the
Standard Viewer. When you select this option, all your client configurations are removed,
