WMO2 G900 / G1800 / G1900
WCOM/GSM/WMO2/WMO2ATDOC
Friday 21 May 1999
WAVECOM confidential ©
2
1.3
Definitions
For the purposes of the AT-commands interface description in this
document, the following definitions apply:
Command mode:
In Command mode, the modem is not
communicating with a remote station, and is ready
to accept commands. When powering-up, the
modem automatically enters this mode, and
automatically returns to this mode when a call is
disconnected.
Online mode:
Also called data mode: In Online mode, the modem
is communicating with a remote station. Data
coming through the RS232 serial link are treated as
data and transmitted to the called part, and data
received from the called part are transmitted to the
terminal through the RS232 serial link. Online mode
is activated by successful completion of a command,
either manually or automatically, to originate or
answer a call, or by receiving the ATO command to
return to online mode from Command mode.
[...]:
Items enclosed in square brackets are optional.
The square brackets themselves must not appear in
the command line.
<
...
>
:
Some syntactical elements are mentioned enclosed
in angle brackets. Actually the meaning (values) for
those elements must appear in the command and
the angle brackets are omitted.
All other characters, including " " ", "&", "
?
", "
==
", parentheses, etc., shall
appear in commands as written.
1.4
Acronyms and abbreviations
For the purposes of the AT-commands interface description in this
document, the following abbreviations apply:
