WMO2 G900 / G1800 / G1900
WCOM/GSM/WMO2/WMO2ATDOC
Friday 21 May 1999
WAVECOM confidential ©
31
4.2.7
Automatic answer
ATS0
This S-parameter controls the automatic answering feature of the mobile.
Application to GSM
ATS0=2
Automatic answer after 2 rings
GSM to application
OK
Application to GSM
ATS0?
Current value
GSM to application
002
OK
always 3 characters with leading zeros
Application to GSM
ATS0=0
no automatic answer
GSM to application
OK
command valid
All others S-parameters (S6,S7,S8 ...) are not implemented.
4.2.8
Incoming Call Bearer
+CICB
Command syntax:
AT+CICB= <mode>
This
specific
command is used for incoming call type when no incoming
bearer is given (single numbering scheme).
<mode> values:
0:
Data
1:
Fax
2:
Speech
Application to GSM
AT+CICB=1
If no incoming bearer, force a fax call
GSM to Application
OK
Command accepted
Application to GSM
AT+CICB=2
If no incoming bearer, force a speech call
GSM to Application
OK
Command accepted
Application to GSM
AT+CICB?
Interrogate value
GSM to Application
+CICB: 2
Default incoming bearer: speech call
Application to GSM
AT+CICB=?
Test command
GSM to Application
+CICB: (0-2)
Speech, data or fax default incoming
bearer
