WMO2 G900 / G1800 / G1900
WCOM/GSM/WMO2/WMO2ATDOC
Friday 21 May 1999
WAVECOM confidential ©
52
4.6.7
Show text mode paraCSDH
This commands gives more informations in text mode result codes. These
informations are in brackets in coCMTI, +CMT, +CDS, +CMGR,
+CMGL.
Application to GSM
AT+CSDH?
current value
GSM to application
+CSDH: 0
OK
do not show header values
4.6.8
New message indiCNMI
This command selects the procedure how receiving the message from the
network.The application must send the following command:
Command syntax:
AT+CNMI=<mode>,<mt>,<bm>,<ds>,<bfr>
<mode>: controls the processing of unsolicited result codes
0
Buffer unsolicited result codes in the TA. If TA result code buffer is full, indications can be
buffered in some other place or the oldest indications may be discarded and replaced with the
new received indications.
1
Discard indication and reject new received message unsolicited result codes when TA-TE link
is reserved. Otherwise forward them directly to the TE.
2
Buffer unsolicited result codes in the TA when TA-TE link is reserved and flush them to the
TE after reservation. Otherwise forward them directly to the TE
3
Forward unsolicited result codes directly to the TE. TA-TE link specific inband used to embed
result codes and data when TA is in on-line data mode.
<mt>: sets the result code indication routing for SMS-DELIVERs
0
No SMS-DELIVER indications are routed.
1
SMS-DELIVERs are routed using unsolicited code:
+CMTI: « SM », <index>
2
SMS-DELIVERs (except class 2 messages) are routed using unsollicited code:
+CMT: [<alpha>,] <length> <CR> <LF> <pdu> (PDU mode)
or
+CMT: <oa>,[<alpha>,] <scts> [,<tooa>, <fo>, <pid>, <dcs>, <sca>,
<tosca>, <length>] <CR><LF><data> (text mode)
3
Class 3 SMS-DELIVERS are routed directly using code in <mt>=2 ;
Message of other classes result in indication <mt>=1
<bm>: set the rules for storing received CBMs (Cell Broadcast Message)
types depend on its coding scheme, the setting of Select CBM Types
(+CSCB command) and <bm>
0
No CBM indications are routed to the TE.
2
New CBMs are routed directly to the TE using unsolicited result code.
+CBM: <length><CR><LF><pdu> (PDU mode)
or
+CBM:<sn>,<mid>, <dcs>,<page>,<pages> (Text mode)
<CR><LF> <data>
<ds> for SMS-STATUS-REPORTs
0
No SMS-STATUS-REPORTs are routed.
1
SMS-STATUS-REPORTs are routed using unsolicited code:
+CDS: <length> <CR> <LF> <pdu> (PDU mode)
or
+CDS: <fo>,<mr>, [<ra>] , [<tora>], <scts>,<dt>,<st> (Text mode)
<bfr>
0
TA buffer of unsolicited result codes defined within this command is flushed to the TE when
<mode> 1...3 is entered (OK response shall be given before flushing the codes)
1
TA buffer of unsolicited result codes defined within this command is cleared when <mode>
1...3 is entered.
