WMO2 G900 / G1800 / G1900
WCOM/GSM/WMO2/WMO2ATDOC
Friday 21 May 1999
WAVECOM confidential ©
63
4.7.5
Calling line identification restriction
+CLIR
This command allows control of the calling line identification restriction
supplementary service.
Command syntax:
AT+CLIR=<n>
Response syntax:
+CLIR:<n>,<m> (for AT+CLIR?)
* <n>: parameter sets the adjustment for outgoing calls
0
Presentation indicator is used according to the subscription of the CLIR service
1
CLIR invocation
2
CLIR suppression
* <m>: parameter shows the subscriber CLIR status in the network
0
CLIR not provisioned
1
CLIR provisioned in permanent mode
2
Unknown (no network...)
3
CLIR temporary mode presentation restricted
4
CLIR temporary mode presentation allowed
Application to GSM
AT+CLIR=2
GSM to application
OK
command valid
Application to GSM
AT+CLIR?
Ask for current functionality
GSM to application
+CLIR: <n>,<y>
OK
<n> and <m> defined as above
4.7.6
Calling line identification presenCLIP
This command allows control of the calling line identification presentation
supplementary service:
Command syntax:
AT+CLIP=<n>
Response syntax:
+CLIP: <n>,<m>
(for AT+CLIP?)
Unsolicited message: +CLIP: <number>, <type> (for incoming call)
* <n>: parameter sets/shows the result code presentation in the TA
0
disable
1
enable
•
<m>: parameter shows the subscriber CLIP service status in the network
0
CLIP not provisioned
1
CLIP provisioned
2
Unknown (no network...)
Application to GSM
AT+CLIP=1
Enable CLIP
GSM to application
OK
CLIP is enabled
Application to GSM
AT+CLIP?
Ask for current functionality
GSM to application
+CLIP: <n>,<m>
OK
<n> and <m> defined as above
GSM to application
RING
+CLIP: "0146290800",129
Incoming call
Incoming call number presentation
Application to GSM
AT+CLIP=0
Disable CLIP presentation
GSM to application
OK
Command valid
