Wavecom W40PC, Manual

Page: 65 / 264

WAVECOM Decoders v6.15 W40PC, W41PC, W51PC General Operating Procedure
•
57
In this example the W51PC software is looking for W51PC cards on a local computer. The
process will take only a few seconds.
Two W51PC cards were detected on the local computer. The entries show type of product
found as well as hardware version and serial number.
The selected entry is stored in the card’s initialization file (*.ini file) and no further entry is
necessary when the W51PC software is started later again. The settings may be changed at any
time.
The W51PC system can be used in a network configuration. This allows the system to be
controlled remotely .
Font
As long as a mode is not running the menu item is disabled.