Wavecom W40PC, Manual

Page: 214 / 264

206
•
Technical Data WAVECOM Decoders v6.15 W40PC, W41PC, W51PC
•
measurement range range 30 – 4000 (W51PC: 30-24000)
symbols/sec
•
determination of PSK symbol rate with cursors
•
continuous display of cursor difference in symbols/sec
•
adjustable signal filter
PSK Phase Plane
•
measurement range 30 – 4000 (W51: PC 30-24000) symbols/sec
•
real-time phase shift value
•
synchronous and asynchronous acquisition selectable
•
DPSK, BPSK or QPSK options in synchronous mode
•
I/Q reference in asynchronous mode with a resolution down to 0.01
Hz
•
adjustable filter for multi-carrier systems
•
adjustable display hold time
HF Operating Mode Analysis ( Code Check )
•
automatic display and adjustment of shift and center frequency
•
automatic determination of most modes
•
simultaneous text display in upper and lower case detected mode
•
separate test of asynchronous Baudot systems
•
automatic switching to the determined mode
HF and VHF/UHF Real-Time FFT Spectrum Display
•
graphical display of the frequency spectrum
•
real-time FFT with 4096 points and a dynamical range >60 dB
•
four adjustable bandwidths from 500 Hz to 24000 Hz
•
averaging measurement with 64 measurements freely pre-
selectable
•
cursors for difference measurements
•
four pre-selectable window types
HF and VHF/UHF Real-Time Waterfall
•
graphical display of the frequency spectrum
•
real-time FFT with 4096 points and a dynamical range >60 dB
•
four adjustable bandwidths from 500 Hz to 24000 Hz
•
graphical display with many measurements
•
averaging measurement with 64 measurements freely pre-
selectable
•
cursors for difference measurements