WAVECOM Decoders v6.15 W40PC, W41PC, W51PC
Install & Uninstall
•
19
If the software does not detect any W41PC card the message shown below is displayed. This
indicates that the installation procedure has not been correct.
•
The address set on the PC card is not the same as the address
entered in "Setup".
•
The address is used by another application. Earlier in this section of
the manual the procedure to find a free address is described.
Other Error Messages
Message
Cause and remedy
"W41PC card communication error. Please
check installation and try again."
Hardware or software error on the W41PC card.
Restart the program.
"W41PC card loader error. Please check
installation and try again."
The loader program or one of the "*.OUT" or
"*.LOD" files are missing. Installation is not correct.
Reinstall the W41PC software.
"W41PC timeout error"
Hardware or software error on the W41PC card.
Restart the program or contact you vendor.
"W41PC device driver error. Please check
installation and try again."
Device driver missing in WINDOWS. Reinstall
W41PC the software.
"W41PC device driver conflict. Please check
installation and try again."
Wrong device driver version in WINDOWS.
Reinstall W41PC the software.
"W41PC internal error. Contact your supplier
for more information. "
Software error. Write down error code and contact
your vendor.
W41PC Software Uninstallation
In certain situations, e.g. a software update, it is necessary to uninstall the software. With the
following commands it is very easy to do:
•
Click on
"START"
, go to the
"SETTINGS"
menu and open
"
CONTROL PANEL
"
•
Select the icon
"ADD/REMOVE PROGRAMS"
•
Select
"INSTALL/UNINSTALL"
•
Choose
"W41PC"
from the displayed list
•
Click on
"ADD/REMOVE"
Summary of Contents for W40PC
