Wave Wireless Networking SC5800, User Manual, Page: 93 / 108

SC5800 User Manual
91
Object ID Group Object Type Access Description
allow storage of the Indoor
Unit's bar code serial number
(as seen on the outside of the
on the outside of product's
housing).
1.3.6.1.4.1.1316.1.1.1.2.4.15
mdrmteIndoorUnitPCBrevision
†
DisplayString read-write "This is a numeric entry code
used to reflect the PCB revision
number and modification
status."
1.3.6.1.4.1.1316.1.1.1.2.5 mdrmteFirmware
1.3.6.1.4.1.1316.1.1.1.2.5.1 mdrmteFTPServerStatus
†
INTEGER read-write This allows
activation/deactivation of the
FTP server that runs in the
Indoor Unit and is used to
upload new revisions of
firmware via a routed IP
network.
1.3.6.1.4.1.1316.1.1.1.2.5.2 mdrmteFlashNewFirmware
†
INTEGER read-write This entry determines the time
when the new version of
firmware will be activated.
1.3.6.1.4.1.1316.1.1.1.3 mdrmteFault
1.3.6.1.4.1.1316.1.1.1.3.1 mdrmteInfo
1.3.6.1.4.1.1316.1.1.1.3.1.1 mdrmteLEDTable SEQUENCE A group of LEDs on the front
panel of the Indoor Unit.
1.3.6.1.4.1.1316.1.1.1.3.1.1.1 mdrmteLEDEntry SYNTAX A LED entry containing objects
describing a particular LED.
1.3.6.1.4.1.1316.1.1.1.3.1.1.1.
1 mdrmteLED Index INTEGER A unique value for each LED in
the Indoor Unit. Its value
ranges from 1 to the number of
LEDs on the front panel of the
Indoor Unit.
1.3.6.1.4.1.1316.1.1.1.3.1.1.1.
2 mdrmteLEDLabel DisplayString read-only SYSTEM Green OK, Orange
(OU/IU Com ms Error), Red
(OU/IU Comms Down)
PAYLOAD Green OK, Orange
(AIS Detected), Red (LOS
Detected)RF LINK Green OK,
Orange (FEC Correcting Errors),
Red (FEC unable to correct
errors)In ALL cases flashing red
and orange LEDs imply historic
alarm conditions (The alarm can
be cleared using the front panel
button 'position 1': see next
paragraph).
1.3.6.1.4.1.1316.1.1.1.3.1.1.1.
3 mdrmteLEDState INTEGER read-only The current state of the LED -
for a detailed description of
functionality, see the
mdrmteLEDLabel entry.
1.3.6.1.4.1.1316.1.1.1.3.1.1.1.
4 mdrmteLEDColour INTEGER read-only The current colour of the LED -
for a detailed description of
functionality, see the
mdrmteLEDLabel entry.
1.3.6.1.4.1.1316.1.1.1.3.1.2 mdrmteOutdoorUnitComms INTEGER read-only Describes the state of
communication with the Outdoor
unit in terms of whether it is up
or down completely.
Alternatively, if there were
errors, these are identified as
comms errors (based on a CRC
check) or content errors (i.e.