Wave Wireless Networking SC5800, User Manual, Page: 87 / 108

SC5800 User Manual
85
Object ID Group Object Type Access Description
1.3.6.1.4.1.1316.1.1.1.1.2.10 mdrmteBkgrndBlkErrRatioExceeded INTEGER read-only The BBER is a ratio of the
number of uncorrectable
blocks/packets received to the
total number of packets
received.
1.3.6.1.4.1.1316.1.1.1.1.2.11 MdrmteMinorPERExceeded INTEGER read-only This parameter indicates if the
minor packet (uncorrectable by
FEC) error rate has been
exceeded based on the defined
threshold listed in the
mdrmteFAULT -
mdrmtePerfTrapThreshold
group. A GH filter is applied to
the calculation. This GH filter
functions as a weighted average
where the GH Average Filter
Fraction is the proportion of the
instantaneous PER used in the
current seconds calculation.
The remainder (1-Fraction(0.7))
is taken from the previous 250
milli-second calculation.
1.3.6.1.4.1.1316.1.1.1.1.2.12 mdrmteMajorPERExceeded INTEGER read-only This parameter indicates if the
major packet (uncorrectable by
FEC) error rate has been
exceeded based on the defined
threshold listed in the
mdrmteFAULT -
mdrmtePerfTrapThreshold
group.
1.3.6.1.4.1.1316.1.1.1.1.2.13 mdrmteCriticalPERExceeded INTEGER read-only This parameter indicates if the
critical packet (uncorrectable by
FEC) error rate has been
exceeded based on the defined
threshold listed in the
mdrmteFAULT -
mdrmtePerfTrapThreshold
group.
1.3.6.1.4.1.1316.1.1.1.1.2.14 mdrmtePrevParamsRestored INTEGER read-only Indicates if “auto recovery” for
the Outdoor Unit settings had to
be invoked due to an unsuitable
choice of frequency or power
settings for the RF link.
1.3.6.1.4.1.1316.1.1.1.1.2.15 Deprecated1 INTEGER write-only Deprecated
1.3.6.1.4.1.1316.1.1.1.1.3 mdrmteG826
1.3.6.1.4.1.1316.1.1.1.1.3.1 mdrmteStatus INTEGER read-only Indicates if 'G.826-like' errored,
s e v erely errored and
unavailable conditions have
been monitored on the RF Link.
1.3.6.1.4.1.1316.1.1.1.1.3.2 mdrmteTotalSeconds Counter read-only Indicates the total number of
seconds, both available and
unavailable.
1.3.6.1.4.1.1316.1.1.1.1.3.3 mdrmteAvailableSeconds Counter read-only A period of unavailable time
begins at the onset of ten
consecutive SES events.
These ten seconds are
considered to be part of
unavailable time. A new period
of available time begins at the
onset of ten consecutive non-
SES ev ents. These ten
seconds are considered to be
part of available time.