Wave Wireless Networking SC5800, User Manual, Page: 86 / 108

SC5800 User Manual
84
Object ID Group Object Type Access Description
header format.
1.3.6.1.4.1.1316.1.1.1.1.2.2 MdrmteRSSI
†
2
Gauge read-only A dBm value representative of
the received signal level. The
value detected is representative
of the level that would be
measured should a CW signal
be input at the Outdoor Unit's
Diplexer RF Port - a Spread
Spectrum signal will appear to
be 20 dB lower. The NMS
makes an adjustment for this
by using a 20 dB offset
(addition to the Indoor Unit MIB-
indicated value).
1.3.6.1.4.1.1316.1.1.1.1.2.3 mdrmteCurrentPER DisplayString read-only This is the current Packet Error
Rate and is based on the
number of uncorrectable
packets/blocks being detected
by the FEC (Forward Error
Correction) circuitry within the
Indoor Unit (based on the
number of errored packets
divided by the total number of
packets transmitted in a
measurement period of
250msec).
1.3.6.1.4.1.1316.1.1.1.1.2. 4 mdrmteMaximizedPER DisplayString read-only This is the maximum Packet
Error Rate detected during the
last measurement period, based
number of maximum number of
uncorrectable packets/blocks
detected by the FEC circuitry
within the Indoor Unit.
1.3.6.1.4. 1.1316.1.1.1.1.2.5 mdrmteLinkUnavailable INTEGER read-only Based on G.826 criteria, this
MIB element indicates RF Link
Availability/Non-availability.
1.3.6.1.4.1.1316.1.1.1.1.2.6 mdrmteFrameUnlock INTEGER read-only The data that is transmitted
across the RF Link is conveyed
in a frame, compiled within the
Indoor Unit's FPGA. The
received data frame is
examined to see that the frame,
with a suitable format has been
received.
1.3.6.1.4.1.1316.1.1.1.1.2.7
mdrmteRemoteFrameUnlock
†
INTEGER read-only Frame-lock
(mdrmteFrameUnlock) as seen
by the other end of the link is
fed back here.
1.3.6.1.4.1.1316.1.1.1.1.2.8 MdrmteErrSecRatioExceeded INTEGER read-only The ESR is a ratio of the
number of Errored seconds (one
second periods within which
uncorrectable packets were
counted by the FEC IC) to the
total time in seconds.
1.3.6.1.4.1.1316.1.1.1.1.2.9 mdrmteSevErrSecRatioExceeded INTEGER read-only The SESR is a ratio of the
number of Severely Errored
seconds (one second periods
within which 30% of packets
over the RF Link had
uncorrectable errors) to the total
time in seconds.
2
† indicates Version 2.00 MIB additions/name changes