manualshive.com logo in svg

wattstopper CI-355, Installation Instructions Manual

The wattstopper CI-355 is a cutting-edge lighting control device designed for energy efficiency. To ensure proper installation and functionality, be sure to download the Installation Instructions Manual for free from manualshive.com. This comprehensive manual will guide you through the setup process step-by-step, ensuring optimal performance of your wattstopper CI-355.

Share
Download
background image

Call 800.879.8585 for Technical Support

5.    When the LED stops flashing, replace the Front Cover.

*Disabling Light Level

Pressing the pushbutton for 5 seconds or more resets the light to default (maxi-
mum).
Press and hold the Light Level button over 5s, the LED will be ON and then OFF 

showing 5s mark has passed. The LED flashes rapidly for 10 seconds after the set-

ting has changed.

Summary of Contents for CI-355













Reviews:

No comments

Related manuals for CI-355

Canon VI-L Manual preview
VI-L
Brand: Canon Pages: 10
DBI SALA Exofit Instructions Manual preview
Exofit
Brand: DBI SALA Pages: 32
Hach 3700 Series Basic User Manual preview
3700 Series
Brand: Hach Pages: 148
Salta 532 Assembly Instructions Manual preview
532
Brand: Salta Pages: 91
Oki B6100n User Manual preview
B6100n
Brand: Oki Pages: 18
M-Audio SESSION User Manual preview
SESSION
Brand: M-Audio Pages: 14
Keating Of Chicago Krisp Socket Assembly Kit For Straight and Offset... Service Instructions preview
Krisp Socket Assembly Kit For Straight and Offset...
Brand: Keating Of Chicago Pages: 1
W-Tec Ondrejnik User Manual preview
Ondrejnik
Brand: W-Tec Pages: 6
Vortice Kit Vario CO2 Instruction Booklet preview
Kit Vario CO2
Brand: Vortice Pages: 132
AirTest TR-5200 Operation & Maintenance Manual preview
TR-5200
Brand: AirTest Pages: 4
Flymo 532430614 Manual preview
532430614
Brand: Flymo Pages: 24
Kingpin TAB Series Operation Manual preview
TAB Series
Brand: Kingpin Pages: 4
Miller MTL-20 Torches Owner'S Manual preview
MTL-20 Torches
Brand: Miller Pages: 18
Chillout QUANTUM PRO Installation Manual preview
QUANTUM PRO
Brand: Chillout Pages: 9
REV Ritter 28503 8 Instructions Manual preview
28503 8
Brand: REV Ritter Pages: 8
Cognex In-Sight 5100 Reference Manual preview
In-Sight 5100
Brand: Cognex Pages: 39
Cardinal 212G Installation And Technical Manual preview
212G
Brand: Cardinal Pages: 52
Rice Lake 590 AG Operation Manual preview
590 AG
Brand: Rice Lake Pages: 56

Brands by name

Popular brands

Load more brands