User Manual
12
1.
Do not use cleaning solvents to clean Wattsonic LFP Battery or expose Wattsonic LFP Battery to
flammable or harsh chemicals or vapors.
2.
Do not use fluids, parts, or accessories other than those specified in this manual, including non-genuine
Wattsonic parts or accessories or parts or accessories not purchased directly from Wattsonic or a Wattsonic-
certified party.
3.
Do not place Wattsonic LFP Battery in a storage condition for more than one (1) month or permit the electrical
feed on the Wattsonic LFP Battery to be severed for more than one (1) month without placing Wattsonic LFP Battery
into a storage condition under Wattsonic’s storage specifications.
4.
Do not paint any part of Wattsonic LFP Battery, including any internal or external components such as the exterior
shell or casing.
5.
Do not directly connect the Wattsonic LFP Battery to photovoltaic (PV) solar wiring.
6.
When installing a Wattsonic LFP Battery in a garage or near vehicles, keep it out of the driving path. Install the
Wattsonic LFP Battery on a side wall and/or above the height of vehicle bumpers.
1.
Install Wattsonic LFP Battery at a height that prevents damage from flooding.
2.
Operating or storing Wattsonic LFP Battery in temperatures outside its specified range might cause
damage to Wattsonic LFP Battery.
3.
Do not expose the Wattsonic LFP Battery to ambient temperatures above 60°C (140°F) or below -30°C (-22°F).
Ensure no water sources are above or near Wattsonic LFP Battery, including downspouts, sprinklers, or faucets.
Environmental conditions
5.
Use the Wattsonic LFP Battery only as directed.
6.
Do not use a Wattsonic LFP Battery if it is defective, appears cracked, broken, or otherwise damaged, or
fails to operate.
7.
Before beginning the wiring portion of the installation, power off the inverter and then open the AC and DC
disconnect switches (if applicable).
8.
Do not attempt to open, disassemble, repair, tamper with, or modify Wattsonic LFP Battery. Wattsonic LFP
Battery is not user serviceable. LFP Cells in Wattsonic Battery are not replaceable. Contact the Wattsonic
Authorized Reseller who sold the Wattsonic LFP Battery for any repairs.
9.
Do not connect Wattsonic LFP Battery to alternating current carrying conductors. Wattsonic All-in-one
storage system including battery and inverter must be wired to either an inverter or a DC combiner panel that is
then wired to an inverter. No other wiring configuration may be used.
10.
Wattsonic LFP Battery contains components, such as switches and relays, that can produce arcs or sparks.
11.
Handle with care to protect the Wattsonic LFP Battery and its components from damage when transporting.
Do not impact, pull, drag, or step on Wattsonic LFP Battery. Do not subject Wattsonic LFP Battery to any
muscular force. To help prevent damage, leave Wattsonic LFP Battery in its shipping packaging until it is ready to
be installed.
12.
Do not insert foreign objects into any part of Wattsonic LFP Battery.
13.
Do not expose Wattsonic LFP Battery or its components to direct flame.
14.
Do not install Wattsonic LFP Battery near heating equipment.
15.
Do not immerse Wattsonic LFP Battery or its components in water or other fluids.
Summary of Contents for 6.0K-25A-3P
Page 2: ......
Page 3: ...Power your home and you will power the planet ...
Page 87: ...V EN_2023 10 19 ...