wattsonic 6.0K-25A-3P, User Manual

Page: 40 / 87

User Manual
40
7.4.2 Assembling the AC connector
The AC terminal block is on the bottom side of the inverter.
a) Take the AC connector out of the accessory bag and disassemble it.
Cable Gland Threaded Sleeve AC Terminal Head
b) According to the figure, select an appropriate cable, peel the insulation sleeve of the AC cable off for 50mm, and peel
off the end of 3L /PE / N wires for 8mm.
c) Insert the stripped end of the five wires into the appropriate hole of the terminal head. Please try to pull out the cable
to make sure it is well connected.
50mm
8mm
Allen Key
The cord end terminals must be locked tightly, and make sure it won’t be loose after a long period of use.