8
Typical RO Faucet Installation
Drinking Feed Tube Connection
Non Air Gap Faucet
Locate the 3/8" threaded quick connect fitting in the parts bag.
After the faucet has been mounted, thread the fitting on the to faucet
stem. Connect the 3/8" blue feed tube to the 3/8" quick connect
fit-ting on the faucet stem. The final polishing filter is clipped on to
the top of the RO membrane housing. Attached to the polishing filter
is a 3/8" quick connect elbow fitting. Attach the open end of the 3/8"
blue tubing from the RO faucet to the 3/8" quick connect elbow on
the polishing filter.
With Non Air-Gap faucets this will be the only tube connected to the
RO faucet.
Air Gap Faucet
Follow the drinking feed tube connection instruc-tions above. Con-
nect the ¼" drain tube from the RO module up to the ¼" fitting on
the RO faucet. The 3/8" drain tube from the RO faucet will connect
to the 3/8" drain saddle.
BLACK RUBBER
WASHER
ESCUTCHEON PLATE
COUNTER TOP/SINK
LOCK WASHER
3/8” FAUCET CONNECTOR
3/8” BLUE TUBING FROM
RO MODULE
1/4” RED LINE TO
RO MODULE
3/8” Line to Drain
Saddle Valve
Non Air Gap Faucet Installation
Air Gap Faucet Installation
Black Rubber
Washer
Escutcheon Plate
COUNTER TOP/SINK
LOCK WASHER
3/8” FAUCET CONNECTOR
3/8” BLUE TUBING FROM
RO MODULE
