The key
(+)
allow you to choose a COMFORT
period at the blinking cursor time. The key
(+)
allow you to choose a REDUCED
period at the blinking cursor time.
At
13
the time indication blinks and day 1 is highlighted, while at
7
the time cursor blinks at 0 h on the sym- bol
(heating
mode). Pressing the
(-)
key you can move the time cursor to the
symbol (REDUCED tem- perature
mode). Then the time cursor jumps to the next hour. Thus COMFORT and REDUCED tempera- ture cycles are selected
using the
(+)
and
(-)
keys.
the programmed values for day 1 are stored. Programming other days is done using identical procedure
moving the cursor by pressing
(►)
. When you switch over to programming the next day the program for the
previous day is saved. On completing the programming of the last day 7, the indication first switches to the
program menu
, and in about 15 seconds back to
.
If during programming no inputs are made within 20 seconds, indication switches first to the program menu
, and in another 15 seconds it returns to
. The inputs were not stored.
Factory / built-in programs (P1 – P9)
If you select any of the factory programs from P1 to P9, you confirm it by pressing the key
(ОК)
. Then
pressing the arrow key
(◄)
scroll back to the menu for selecting an operation mode (if the arrow key is not
pressed in about 15 seconds the display turns back to operating mode
).
6.3 Factory set COMFORT & REDUCED temperature times in programs P1 - P9
P1:
Morning, Evening & Week-end
P6:
Morning, Afternoon & Week-end
P2:
Morning, Midday, Evening & Week-end
P7:
7h - 19h (Office)
P3:
Day & Week-end
P8:
8h – 19h , Saturday (Shop)
P4:
Evening & Week-end
P9:
Week-end (Secondary House)
P5:
Morning, Evening (bathroom)
Day of the week
Cursor time
Summary of Contents for RCL-HC
Page 1: ...GB 1 Climatic Control H C User Guide PPLIMW08157Ch EN wattswater eu ...
Page 26: ......
Page 27: ......
Page 28: ...PLIMF08157Ch EN ...