background image

1

Blue Universal Thermostat with 

Automatic Heat/Cool Changeover Option

Single Stage, Multi-Stage or Heat Pump

Installation and Operating Instructions for Models:

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS 
CAREFULLY  BEFORE  INSTALLING  OR  OPERATING 
THIS  CONTROL  COULD  CAUSE  PERSONAL  INJURY 
AND/OR PROPERTY DAMAGE.

Save these instructions for future use!

APPLICATIONS 

www.white-rodgers.com

www.emersonclimate.com

1F83-0422 Thermostat

Model

Programming Choices

 1F85-0422

5/1/1 Day 5/2 Day

Non-Programmable

 1F83-0422

Non-Programmable

THERMOSTAT APPLICATION GUIDE

Description

Heat Pump (No Aux. or Emergency Heat)

Yes

Heat Pump (with Aux. or Emergency Heat)

Yes

Systems with up to 2 Stages Heat, 2 Stages Cool

Yes

Heat Only Systems (with optional fan switch)

Yes

Millivolt Heat Only Systems – Floor or Wall Furnaces

Yes

Cool Only Systems

Yes

Gas or Oil Heat

Yes

Electric Furnace

Yes

Hydronic (Hot Water) Zone Heat – 2 Wires

Yes

Hydronic (Hot Water) Zone Heat – 3 Wires

Yes

PART NO. 37-7136A

1007

SPECIFICATIONS 

Electrical Rating:
 

Battery Power ....................................................   mV to 30 VAC, NEC Class II, 50/60 Hz or DC

 

Input-Hardwire ...................................................   20 to 30 VAC

Terminal Load ...........................................................   1.5 A per terminal, 2.5A maximum all terminals combined
Setpoint Range .........................................................   45° to 90°F (7° to 32°C)
Differential (Single Stage) .........................................   Heat 0.6°F; Cool 1.2°F (adjustable)
Differential (Heat Pump) ...........................................   Heat 1.2°F; Cool 1.2°F (adjustable)
Operating Ambient ....................................................   32° to +105°F (0° to +41°C)
Operating Humidity ...................................................   90% non-condensing max.
Shipping Temperature Range ...................................   -4° to +150°F (-20° to +65°C)
Dimensions Thermostat ............................................   3-7/8”H x 5-1/8”W x 1-1/4”D

ATTENTION: MERCURY NOTICE

This  product  does  not  contain  mercury.  However,  this 
product may replace a product that contains mercury.

Mercury  and  products  containing  mercury  must  not  be 
discarded  in  household  trash.  Do  not  touch  any  spilled 
mercury.  Wearing  non-absorbent  gloves,  clean  up  any 
spilled  mercury  and  place  in  a  sealed  container.  For 
proper  disposal  of  a  product  containing  mercury  or  a 
sealed container of spilled mercury, place it in a suitable 
shipping container. Refer to 

www.white-rodgers.com

 for 

location to send product containing mercury.

To prevent electrical shock and/or equipment damage, 
disconnect electric power to system at main fuse or 
circuit breaker box until installation is complete.

CAUTION

!

Index

Page

Installation

2

Wiring Connections

2

Thermostat Quick Reference

3

Installer Configuration Menu

4

Operating Your Thermostat

6

Programming

7

Troubleshooting

8

Summary of Contents for 1F83-0422













Reviews: