PWF Filter Systems
7
Bypass Valve Installation
7
INSTALLATION
Figure 1: Plumbing with by pass (Standard).
Figure 3: Bypass (standard).
Figure 6:
Figure 2: Plumbing with 3-way b pass.
Figure 4: 3-way bypass plumbing.
When installing sweat copper follow state and fed-
eral codes by using a lead free solder and flux. Use
a joint compound to seal threaded pipe. Some
homes use the cold water pipes for an electrical
ground (metal only). When finished with plumbing,
a ground wire should be connected to the copper
pipes to complete the ground circuit. Use two
clamps and #4 copper for this.
Figure 5:
When installing sweat copper follow state and
federal codes by using a lead free solder and flux.
Use a joint compound to seal threaded pipe. Some
homes use the cold water pipes for an electrical
ground (metal only). When finished with plumbing,
a ground wire should be connected to the copper
pipes to complete the ground circuit. Use two
clamps and #4 copper for this.
Figure 5:
Figure 6:
