www.enware.com.au
© Enware Pty Ltd
Page 16
PRE-RINSE SPRAY GUN OPERATION
Squeeze spray trigger and pull down hose to
desired angle and position to wash.
SEE IMAGE 43
To make the spray stay on, slide the holding
ring over the trigger. SEE IMAGE 44
To turn off, let go of the trigger or slide the
holding ring off the spray lever handle.
Use the hook to stow away the spray gun
OPERATING LEVER TAPS
To operate taps, turn handle lever in the
directions indicated: either pulling forward and
down toward the user, or turning outwards to
open. SEE IMAGE 45
operating instructions
cleaning
IMAGE 43
IMAGE 45
¼ Turn Contra-Rotating Handles
Off
On
Off
On
Off
On
Off
On
Bench Mounted Mixing Set
Wall Mounted Mixing Set
IMAGE 44
Enware Product should be cleaned with a soft damp cloth using only mild liquid detergent or soap and water.
Do not use cleaning agents containing a corrosive acid, scouring agent or solvent chemicals. Do not use cream
cleaners, as they are abrasive. Epoxy coated surfaces should only be cleaned with a cloth and clear water or
mild detergent.
Use of unsuitable cleaning agents may damage the surface. Any damage caused in this way will not be covered
by warranty.
