www.enware.com.au
© Enware Pty Ltd
Page 5
1. Mark 2x holes to be drilled on the
bench. (min. 40mm - max. 160mm to
the centre from wall, centres 150mm
apart.)
For adjustable breech models- max.
350mm centres.
2. Drill the holes (
Φ
25mm) using a hole
saw or similar tool.
3. (For adjustable breech models)
Measure the distance from the centre
of breech to centre of water inlet point.
From this distance subtract 25mm and
mark this on each end of the breeching
piece.
Cut the breeching piece to the required
length using tube cutters or similar hand
tool. Assemble the breeching piece to
tap bodies. SEE IMAGE 11-1
4. Ensure the base cover domes and clear
washers are fitted, and fix base body
onto bench. SEE IMAGE 12
From underneath the bench, fit lock
nuts onto the tails and tighten firmly
using a spanner.
5. Proceed to Fitting Lever Handles – page
12
IMAGE 12
25
25
150 +/-5 mm
40 mm MIN -
160 mm MAX
WALL
max. 350mm for adjustable breech
IMAGE 11
Maximum bench
thickness: 30mm
hob mounted exposed breech
FS012
IMAGE 11-1
25
25
CUT
CUT
