background image

 

11

 

ES-A-ACV-LF985GD  2115 

© 2021 Watts

LEAD FREE

*

Lead Free Ball Valve

Specifications

Standard Material:   

Copper Silicon Alloy Body and Adaptor 

 

    Chrome Plated Ball

Optional Material:

     Stainless Steel Housing, Body and Adaptor  

 

    Stainless Steel Ball  

Pressure Rating:

       600psi (41 bar) Non Shock

Temp Rating:  

   

-40°F - 400°F

C

H

L

Model BV

Ball Valve

Size: 

¼

" – 1" NPT 

Model BV Ball Valves are used in pilot lines to provide a positive 

shutoff in any override or maintenance situation for simple trouble 

shooting. This 2-piece, full port valve features: bottom loaded stems, 

PTFE seats and packing. 

Size

Dimensions

Weight

C

H

L

in.

in. 

mm

in.

mm

in.

mm

lbs.

kg.

 

1/4

1

 

13/16

46

3

 

7/16

87

1

 

3/4

 

45

0.4

0.2

 

3/8

1

 

13/16

46

3

 

7/16

87

1

 

3/4

 

45

0.4

0.2

 

1/2

1

 

13/16

46

3

 

7/16

87

1

 

15/16

50

0.4

0.2

 

3/4

2

 

1/4

 

57

4

101

2

 

5/16

59

0.8

0.3

* The wetted surface of this product contacted by consumable water 

contains less than 0.25% of lead by weight.

ACV Standard Components - Series LF985GD

Summary of Contents for AMES LF985GD Series




















Reviews: