7
5. Once all outputs have been saved, press the
button to return to
the home screen or press
Cancel
to return to the previous menu.
5.2 Setting the Units of Measurement
This instrument can measure in Parts per Billion (ppb), Parts per Million
(ppm), Milligrams per Liter (mg/L) and Milligrams per Milliliter (mg/mL).
To select the unit of measurement:
1. Press
Units
on the Configuration Menu screen.
2. Press the desired unit of measurement for the instrument. Then
press
Save
.
3. Once the units of measurement have been saved, press the
button to return to the home screen or press
Cancel
to return to the
previous menu.
5.3 Setting the Date/Time
The time and date can be adjusted using this menu. The change will be
reflected in the date/time stamps on the home screen and logged data.
To set/change the date/time:
1. Press
Date/Time
on the Configuration Menu screen.
2. Press
Set Date
or
Set Time
, depending on which setting you wish
to change.
3. If changing the date, use the up and down arrows to select the
month, date and 2-digit year. If changing the time, use the up and
down arrows to select the hour and minutes. Then press
Save
.
4. Once the date and time have been saved, press the
button to
return to the home screen or press
Cancel
to return to the
previous menu.
5.4 Adjusting the Brightness
The screen brightness can be adjusted to provide easier readability of
the display in low light or no light conditions. There are 10 brightness
levels available. To adjust the screen brightness:
1. Press
Brightness
on the Configuration Menu screen.
2. Using the up and down arrows, select the desired brightness. Then
press
Save
.
3. Once the desired brightness has been saved, press the
button
to return to the home screen or press
Cancel
to return to the
previous menu.
5.5 Setting the Time Schedule
The Schedule Readings screen provides the option to enable and
schedule up to 4 readings in a 24 hours day. Continuous mode will take
readings without any delay and can be useful during the commissioning
of the instrument.
For the Scheduled/Continuous mode to work the instrument must be in
Auto Mode.
To change the schedule:
1. Click the time text box to configure the schedule. Note: Readings
must be scheduled at least one hour apart, if you attempt to
schedule less than one hour apart then the time setting will not be
accepted.
Note: Scheduling configuration buttons are disabled if the
instrument is in Continuous mode. 00:00 will set the timer at 24:00.