manualshive.com logo in svg

WATTS INNOVATIONS PRISM R.P.A.S., Flight Manual

The WATTS INNOVATIONS PRISM R.P.A.S. comes with a comprehensive Flight Manual to guide users through every feature and function of this cutting-edge drone. You can easily download the manual for free from our website to ensure a smooth and successful flight experience.

Share
Download
background image

PRISM FLIGHT MANUAL

88

7.12.9 UPDATING WATTSQGC

Watts Innovations will frequently release new versions of the WattsQGC Application for 
the EchoSky Mobile handset. These updates will include new feature implementations, 
improvements and bug fixes. It is highly recommended that users continually update both 
WattsQGC as well as the onboard PRISM firmware to ensure optimal performance and the 
best user experience possible.

Updating the WattsQGC app will not cause any information such as cached maps, 
automated missions, or telemetry data to be erased.
 
Upon opening the WattsQGC application, a pop-up will appear asking the operator if he 
would like to update the application. Simply press “YES” and the application will begin to 
update. 

NOTE:

The EchoSky Mobile handset must be connected to a WiFi network in order to update.

You may see the current version of the WattsQGC App by accessing the General Settings 

tab of the App Settings

Summary of Contents for PRISM R.P.A.S.














































































































































Reviews:

No comments

Related manuals for PRISM R.P.A.S.

UBSAN H216A X4 STAR PRO Quick Start Manual preview
H216A X4 STAR PRO
Brand: UBSAN Pages: 16
ZERO-X Raven+ User Manual preview
Raven+
Brand: ZERO-X Pages: 20
Overmax OV-XBeeDrone 1.5 User Manual preview
OV-XBeeDrone 1.5
Brand: Overmax Pages: 33
Premier designs Pyramid Racer User Manual preview
Pyramid Racer
Brand: Premier designs Pages: 8
TTA TIANNONG M6E-1 Manual preview
TIANNONG M6E-1
Brand: TTA Pages: 56
Xtreem Mosca Instruction Manual preview
Mosca
Brand: Xtreem Pages: 16
Xtreem FlyeEye Instruction Manual preview
FlyeEye
Brand: Xtreem Pages: 20
Parrot Mambo Quick Start Manual preview
Mambo
Brand: Parrot Pages: 120
Jamara HL20 Instructions Manual preview
HL20
Brand: Jamara Pages: 32
Jamara 42 2027 Instructions Manual preview
42 2027
Brand: Jamara Pages: 16
dji Inspire 1 User Manual preview
Inspire 1
Brand: dji Pages: 20
dji Agras MG-1P Operating Instructions Manual preview
Agras MG-1P
Brand: dji Pages: 17
dji FC7BGC User Manual preview
FC7BGC
Brand: dji Pages: 39
Brookstone 324460 Manual preview
324460
Brand: Brookstone Pages: 11
Brookstone Flight Force 324185 Instruction Manual preview
Flight Force 324185
Brand: Brookstone Pages: 13
Brookstone 324463 Safety And Operating Instructions Manual preview
324463
Brand: Brookstone Pages: 15

Brands by name

Popular brands

Load more brands