WATTS INNOVATIONS PRISM R.P.A.S., Flight Manual

Page: 102 / 141

PRISM FLIGHT MANUAL
102
TO ASSEMBLE A BATTERY ONTO A REMOVABLE BATTERY TRAY, PERFORM THE FOLLOWING STEPS:
1. Attach the adhesive velcro pieces to both the battery and battery tray.
2. Place the battery onto the battery tray. Ensure that it is aligned in such a way that the
battery lead is facing the same direction as the pointed end of the battery tray. For
smaller batteries, they may be placed in the center of the tray. For larger batteries,
there may be limited space between both batteries which may require the user to
offset one battery to the left and the other to the right.
3. Insert the long velcro straps into the removable battery tray and pull tight. For larger
batteries, there may be limited space between both batteries which may require the
user to have the metal loops on the outsides of the packs (the left battery would have
the loop on the left, and the right battery would have the loop on the right).
4. Test fit the battery tray onto the removable payload receptacle to ensure a good fit.
5. For batteries with a long battery lead, use the small velcro strap to take up the excess
slack in the lead. This will ensure that the battery leads cannot make contact with the
rear propellers while in flight.
Larger batteries require a slight offset to both the left and
right to ensure they will properly fit on the removable
payload receptacle.
Attach adhesive velcro to both battery and battery tray.
Insert straps and pull tight.