WATTS INNOVATIONS PRISM R.P.A.S., Flight Manual

Page: 109 / 141

PRISM FLIGHT MANUAL
109
1. With the payloads removed (as shown in the previous section), loosen the 4 bolts from
each side of the aircraft which attach the payload rails to the main frame using an m2.5
hex driver. NOTE: These bolts are captured inside the payload mounting rail so there is
no need to fully remove them from the payload mounting rails.
2. Rotate each of the canopy posts 90 degrees. Once all four canopy posts have been
rotated away from the canopy, the canopy will no longer be held in place and can be
removed.
Loosen the four bolts from each side (4 on each side, 8 total)
using an m2.5 hex driver.
Payload mounts have been removed.
Canopy post rotated out of the way.