11.4 110V relay module pcb connectors
37
12 PROFIBUS control wiring
40
12.1 PROFIBUS installation
40
12.2 Pin assignments at the pump
41
13 Switching on (Manual, PROFIBUS, Universal and Un)
42
13.1 Switching on the pump for the first time (Manual, PROFIBUS, Universal and
Un only)
42
13.2 Switching the pump on in subsequent power cycles (Manual, PROFIBUS,
Universal and Un only)
44
14 Switching on (Remote)
45
15 Pump operation
46
15.1 Pump operation (Remote pump)
46
15.2 Pump operation (Manual, PROFIBUS, Universal and Un only)
46
16 Manual mode (Manual, PROFIBUS, Universal and Un only)
49
17 PROFIBUS mode(PROFIBUS only)
52
17.1 Assigning the PROFIBUS station address at the pump
53
17.2 PROFIBUS communication errors
55
17.3 PROFIBUS GSD file
56
17.4 User Parameter Data
58
17.5 PROFIBUS data exchange
59
17.6 Device-related diagnostic data
62
17.7 Channel-related diagnostic data
62
18 Flow calibration mode (Manual, PROFIBUS, Universal and Un only) 64
19 Analog 4-20mA mode (Universal and Un only)
67
19.1 Calibrate the pump for 4-20mA control (Un only)
72
20 Contact Mode (All Universal and Un models except 110V relay
versions)
77
20.1 Contact settings
77
20.2 Contact operating mode (All Universal and Un models except 110V
relay versions)
79
20.3 Fluid recovery mode (Manual, PROFIBUS, Universal and Un only)
80
20.4 Remote fluid recovery (Universal and Un models without relay
modules)
82
21 Main menu (Manual, PROFIBUS, Universal and Un only)
84
21.1 Fluid level monitor (Manual, PROFIBUS, Universal and Un only)
85
21.2 Security settings (Manual, PROFIBUS, Universal and Un only)
89
21.3 General settings (Manual, PROFIBUS, Universal and Un only)
92
21.4 MODE menu (Manual, PROFIBUS, Universal and Un only)
97
21.5 Control settings (Manual, PROFIBUS, Universal and Un only)
98
21.6 Help (Manual, PROFIBUS, Universal and Un only)
105
m-qdos-en-02
3
