Watkiss P2T, Unpacking And Installation Instructions, Page: 9 / 84

P2T 2-Knife Trimmer Page 1-5 CHAPTER 1 - Before Installation
Issue 1b, June 2018
Using a Fork-Lift Truck to Lift the P2T
1.4 Using a Fork-Lift Truck to Lift the P2T
Figure 1:1. Machine orientation
Note:
The trim bin can be installed on the RHS for left-to-right booklet makers or
on the LHS for right-to-left booklet makers.
Figure 1:2. Distance between the forks
Caution:
• The installed weight of the P2T is 300 kg (660 lb).
• The shipping weight of the P2T is 360 kg (792 lb).
You can lift the P2T directly with a fork-lift or pallet truck, but where possible, lift the
pallet and P2T together.
If you lift the P2T directly, then you must:
•
Fold the outfeed stacker, see Section B.1
• Insert the forks under the front or rear of the P2T. Do not insert the forks under
the LH side or RH side. See
Figure 1:1.
• If the distance between the forks is adjustable, then adjust the forks to the
dimensions given. See
Figure 1:2.
Front
Rear
Trim bin
LH
RH
Outfeed
stacker
A
B
Dimension A:
Maximum 450mm (17.5”)
Dimension B:
Minimum 140mm (5.5”)
Fork