Watkiss P2T, Unpacking And Installation Instructions, Page: 58 / 84

P2T 2-Knife Trimmer Page B-2 APPENDIX B - Uninstall the P2T
Issue 1b, June 2018
Disconnect the P2T from the BLM
B.1 Disconnect the P2T from the BLM
Tools:
• Allen keys: 3, 4, 5, 8mm
• Spanners: 8, 10, 17mm
• Steel rule or tape measure
• Wire cutters - supplied with the BLM. See Section 1.6.1 .
• 14mm socket - supplied with the BLM. See Section 1.6.1 .
• 17mm socket
• Ratchet handle - supplied with the BLM. See Section 1.6.1 .
Mains power cable
Mains power socket
Mains on/off switch
Fuse holders
Figure B:1. P2T mains power input
B
Figure B:2. Fold the outfeed stacker
A


Step Action Information
1 Use the mains on/off switch to turn
off the P2T. See Figure B:1.
2 Remove the trim bins from both
sides of the P2T.
Mains power cable
Pivot bracket
P2T
Small cable ties
Figure B:3. Remove the mains power cable from the pivot bracket
Figure B:4. Docking pivot pin
Pivot bracket
Pivot location bracket
Docking pivot pin