• Remove the unit from the box and
remove bubble-wrap packaging.
• Use zip ties or rope to attach the unit
securely to a
water tank
or other
support.
• Attach the barb
fitting/hose to
the 3/8” outlet
side of the
circulation
pump. Secure
with hose
clamp.
WHAT ELSE IS NEEDED
1. 12-volt DC battery (deep cycle/
marine type is best)
2. Solar or electric battery charger
for 12-volt battery
3. Salt/Sodium Chloride (any table salt)
6
WaterStep M-100 Chlorine Generator
4. Slotted screwdriver
5. Measuring tape
6. Large pair of pump pliers
7. Bucket to collect rinse water
8. Water storage tank(s)
INSTALLING THE CHLORINE GENERATOR
• Attach the opposite end of this hose to
the barbed fitting to the short side of
the heat exchanger. Tighten the hose
clamp as needed.
• Attach remaining braided hose to the
barb fitting located on the black injector.
Move hose clamp to base of barb fitting
and tighten.
