9
WaterStep M-100 Chlorine Generator
• Pour the solution of water and salt into
the chlorine generator. Add more water
to get the level to the maximum line
(approximately
600ml total).
• Pour approximately 600ml of water
(or recycled sodium hydroxide) into
the oval-shaped hole at the top of the
unit (water/sodium hydroxide) until
the level reaches the maximum line.
CHLORINATION PROCESS
• If using plain water in the SODIUM
HyDROxIDE side, pour about 5 grams
of salt (1/2 teaspoon) into this compart-
ment. This will speed up the process of
chlorine
generation.
• Connect wires from the circulation
pump to the battery and check for
leaks (black to negative/-, red to
po terminal).
• Connect wires from chlorine generator
to the battery (black to -, red to +).
