12
Main Menu
12
:
00
1. To enter Main Menu, press the
Menu/Enter
button.
(Time of Day will flash)
2. To set the
Time of Day
, press the
Set/Change
button.
(First digit will flash)
Example
[
12-00
]
-
To change digit value, press the
Set/Change
button.
-
To accept the digit value, press the
Menu/Enter
button.
-
Next digit will flash to begin setting.
-
Once the last digit display is accepted, all digits will flash.
3. To set
A.M.
or
P.M
., press the
Menu/Enter
button.
-
To change digit value, press the
Set/Change
button.
Example
[
A
]
-
To accept the digit value, press the
Menu/Enter
button.
-
Once A.M. or P.M. is accepted, the next menu item will flash.
4. A. To set
Hardness
an “H” will appear to enter Compensated Hardness in grains per gallon (gpg)
Default setting is 25 gpg.
Example
[
H - 25
]
5.
To Exit Main Menu, press the
Menu/Enter
button.
Note: If no buttons are pressed for 60 seconds, the Main Menu will be exited automatically.
Programming the Control Valve
- Programming The Control Valve -
1. Set time of day.
2. Set a.m. or p.m.
3. Set Hardness (grains per gallon).
Note:
Salt settings are pre-set at the factory for the maximum shown on the capacity charts.
Warning:
Do not reduce salt settings below 9 lbs. as the water level in the brine tank will not reach the grid
plate.
