23
E.
To Service Injector and Screen
1. Follow steps A1-A2.
2. Unscrew injector cover screws and remove injector cover.
3. Remove injector screen and clean or replace.
4. Remove injector and clean or replace.
5. Apply silicone lubricant to injector seal and replace cover and screws.
F.
To Replace Meter
1. Follow steps
A1 - A3
2. Unplug meter cable from front of circuit board.
3. Unscrew meter assembly nut from valve body.
4. Remove meter from valve body and clean or replace as necessary.
5. Reinstall meter, nut and cable.
G.
To Replace Brine Valve
1. Follow Piston Replacement instructions. After the piston is removed, pull the brine valve from
the valve body.
2. Inspect brine valve cavity in valve body and remove any foreign matter that would interfere with
brine valve operation.
3. Apply silicone lubricant to brine valve O rings and push the new brine valve into the valve body.
4. Continue following Piston Replacement instructions to reinstall piston and powerhead
Service Instructions / Instructional Videos Available at www.watersoftinc.com
