Waters Network Systems GSM2109 Operating Manual Download Page 92

Page: 92 / 92

Waters Network Systems GSM2109/GSM1009-SFP User’s Manual Page 92

ProMedia Converters

3 Years from date of manufacture (see note)

Note: Warranty period for any and all external power supplies is one (1) year from

date of purchase.

EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE,

WATERS

NETWORK SYSTEMS

GRANTS NO OTHER WARRANTIES, EXPRESSED OR

IMPLIED, BY STATUTE OR OTHERWISE, REGARDING THE PRODUCTS, THEIR

FITNESS FOR ANY PURPOSE, THEIR QUALITY, THEIR MERCHANTABILITY, OR

OTHERWISE.

WATERS NETWORK SYSTEMS’

LIABILITY UNDER THE WARRANTY SHALL BE

LIMITED TO PRODUCT REPAIR, OR REPLACEMENT OF THE BUYER’S PURCHASE

PRICE. IN NO EVENT SHALL

WATERS NETWORK SYSTEMS

BE LIABLE FOR THE

COST OF PROCUREMENT OF SUBSTITUTE GOODS BY THE CUSTOMER OR FOR

ANY CONSEQENTIAL OR INCIDENTAL DAMAGES FOR BREACH OR WARRANTY.

Summary of Contents for GSM2109





























































































Search results

Summary of Contents for GSM2109

Reviews:

Related manuals for GSM2109

Brands by name

Popular brands

Waters Network Systems GSM2109, Operating Manual

Search results

Summary of Contents for GSM2109

Reviews:

Related manuals for GSM2109

Brands by name

Popular brands