Waters Network Systems GSM2109 Operating Manual Download Page 13

Page: 13 / 92

Waters Network Systems GSM2109/GSM1009-SFP User’s Manual Page 13

3.3.2 Web-based

Management

The switch provides an embedded HTML web site residing in flash memory. It offers

advanced management features and allow users to manage the switch from anywhere

on the network through a standard browser such as Microsoft Internet Explorer.

3.3.3 SNMP Network Management

SNMP (Simple Network Management Protocol) provides a means to monitor and control

network devices, manage configurations, collect statistics, performance and security

information.

3.4 Hardware

Description

Front Panel

The front panel of the GSM2109/1009 switch consists of nine auto-sensing

10/100/1000Base-TX RJ45 ports and one mini GBIC slot. The ninth

10/100/1000Base-TX port shares the slot with the mini GBIC. So, if the GBIC is used,

the ninth 10/100/1000Bse-TX port is inactive. Therefore, the GSM2109/1009 provides

nine usable ports. You have the choice of using the ninth port in copper or fiber. The

LED indicators are also located on the front panel of the switch.

The console connection is also on the front panel of the switch. The console port can

be used to perform management functions. Console connection requires a direct

connection between the switch and a workstation with a RS-232 cable.

Figure 3.2 - Front Panel of the GSM2109 Switch

Rear Panel

A three-pronged AC power plug is located on the rear panel of the switch. The

GSM2109/1009 switch operates in the range 100-240V AC, 50-60Hz.

Summary of Contents for GSM2109





























































































Search results

Summary of Contents for GSM2109

Reviews:

Related manuals for GSM2109

Brands by name

Popular brands

Waters Network Systems GSM2109, Operating Manual

Search results

Summary of Contents for GSM2109

Reviews:

Related manuals for GSM2109

Brands by name

Popular brands