Waters Network Systems GSM2109/GSM1009-SFP User’s Manual Page 60
the link to that Link Aggregation Group and enable its transmission and reception
functions. Link aggregation allows you to group up to eight consecutive ports into a
single dedicated connection. This feature can expand bandwidth to a device on the
network. LACP operation requires
full duplex
mode. Aggregator setting involves the
following:
•
System priority
– a value used to identify the active LACP. The switch
with the lowest value has the highest priority and is selected as the active
LACP.
•
Group ID
– There are three trunk groups for configuration.
•
LACP
– When enabled, the group is LACP static trunk group. If disabled,
the group is local static trunk group. All ports support LACP dynamic
trunk group. If connecting to a device that also supports LACP, the LACP
dynamic trunk group will be created automatically.
•
Work Ports
– A maximum of four ports can be aggregated at the same
time.
•
Select
the ports to join the trunk group. A maximum of four ports
can be aggregated at the same time. Use the
Add
button to add
the port. To remove unwanted ports, select the port and click
Remove
.
•
If LACP is enabled, you can configure the LACP Active/Passive status in
each port on the state activity page.
•
Click
apply
to confirm the setting.
•
The Trunk Group can be deleted by selecting the
Group ID
and clicking
Delete
.
