Waters Network Systems GSM2109 Operating Manual Download Page 67

Page: 67 / 92

Waters Network Systems GSM2109/GSM1009-SFP User’s Manual Page 67

for configuration. Once 802.1q is enabled, all the ports on the switch belong to default

VLAN, VID is 1. The default VLAN cannot be deleted.

GVRP allows automatic VLAN configuration between the switch and nodes. If the

switch is connected to a device with GVRP enabled, you can send a GVRP request

using the VID of a VLAN defined on the switch; the switch will automatically add that

device to the existing VLAN.

5.25 – VLAN 802.1q Configuration Screen

1. To

enable

the GVRP protocol, check box to enable GVRP protocol.

2. Select the ports to be configured.

3. There are three link types.

Access Link

Trunk Link

Hybrid Link

4. Assign

the

Untagged VID

5. Assign

the

Tagged VID

6. Click

apply

Summary of Contents for GSM2109





























































































Search results

Summary of Contents for GSM2109

Reviews:

Related manuals for GSM2109

Brands by name

Popular brands

Waters Network Systems GSM2109, Operating Manual

Search results

Summary of Contents for GSM2109

Reviews:

Related manuals for GSM2109

Brands by name

Popular brands