Waters Network Systems GSM2109/GSM1009-SFP User’s Manual Page 30
Command Level
Description
Example
In the event of a loop,
spanning tree considers the
path cost when selecting an
interface to place into the
forwarding state.
stp-path- priority
[Port Priority]
I
Use the spanning-tree
port-priority interface
configuration command to
configure a port priority that
is used when two switches
tie for position as the root
switch.
switch(config)#interface
fastEthernet 2
switch(config-if)#
stp-path-priority 127
stp-admin-p2p
[Auto|True|
False]
I
Admin P2P of STP priority.
switch(config)#interface
fastEthernet 2
switch(config-if)#
stp-admin-p2p Auto
stp-admin-edge
[True|False]
I
Admin Edge of STP priority. switch(config)#interface
fastEthernet 2
switch(config-if)#
stp-admin-edge True
stp-admin-non-s
tp
[True|False]
I
Admin NonSTP of STP
priority.
switch(config)#interface
fastEthernet 2
switch(config-if)#
stp-admin-non-stp False
show
spanning-tree
E
Display a summary of the
spanning-tree states.
switch>show spanning-tree
no
spanning-tree
G
Disable spanning-tree. switch(config)#no
spanning-tree