WaterRower Indo-row A1, Owner'S Manual

Page: 27 / 28

26
TROUBLESHOOTING TIPS
1.
Loosening bolts - over time and with use bolts can come loose, use the
5mm Allen key to gently tighten the bolts. If the bolts continue to loosen
use a small amount medium strength Loctite
®
to fasten the nuts and bolts
more securely.
2.
Monitor not turning on - check the batteries positioned behind the
monitor. Unscrew the monitor and gently lift to access the battery pack.
3.
Monitor not counting down - check the monitor and sensor connector is
connected. Check all wiring is intact.
4.
Paddle not turning smoothly, loosen all tank bolts and retighten.
For other troubleshooting and service tips, please visit:
www.waterrowerservice.com
or contact WaterRower at
support@waterrower.com
Make note of the serial number. This number can be found on the level gauge
sticker and is required when contacting WaterRower for customer support.
S/N
o
:
If you have any questions or comments about the assembly or use of this unit,
please contact
support@waterrower.com
or the phone numbers on the back of
this booklet.
(countries and provinces) do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you.
Restriction on Other Damages: WaterRower shall not be liable for any direct,
consequential, incidental, indirect or special damages under this Limited Warranty or
any implied warranty that may arise under your country, province or state law. Some
states (countries and provinces) do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
Any dispute arising from the terms of this Limited Warranty must be resolved in a court
within the state of Rhode Island, USA.
Additional information on parts, assembly, preventative maintenance and manuals, as
referred to within this Limited Warranty, can be found at www.waterrower.com/warranty