Waterous ECLIPSE CAFSystem 2.0, Installation, Operation And Maintenance Instructions

Page: 4 / 44

Operation 30
Operation Overview 30
Hot Liquid 30
Hot Surface 30
Operating the Panel Light 31
Selecting the Hose 31
Selecting the Nozzle 31
Understanding the Waterway Valves 31
Tank to Pump Valve 31
Clear Water Discharge Valve 31
Tank fill 31
Operating the Waterway Valves 32
Opening the Valve 32
Closing the Valve 32
Starting and Stopping the Engine 32
Priming the Water Pump 32
Using Water Sources 32
Drawing From the On-Board Tank 32
Drawing From an External Source 32
Filling the On-board Tank 32
Priming the Foam Pump 33
Preparing for Operation 33
Operating the CAFS 34
Launching the Interface 34
Operating the Discharge 34
Adjusting the Solution Percent 34
Adjusting the Valve Controls 34
Adjusting the Engine Speed 34
Adjusting the Water Pressure 34
Using Discharge 1 34
Using the Clearwater Discharge 34
Using the Auxiliary Air Outlet 34
Flushing the System 34
Operating the Drain Valve 34
Accessing the Interior Components 35
Typical Operation Sequence 35
Operating the Module 35
After Operating the Module 35
Maintenance 36
Maintenance Precautions 36
Maintenance Schedule 36
Relieving Waterline Pressure 37
Relieving Airline Pressure 37
Servicing the Sump 37
Checking the Sump Oil Level 38
Draining the Sump Oil 38
Adding Sump Oil 38
Replacing the Oil Separator 38
Replacing the Oil Filter 39
Servicing the Compressor/Pump Drive Belt 39
Replacing the Compressor Air Filter 40
Servicing the Foam Pump Oil 40
Servicing the Engine Oil 40
Troubleshooting 41
Schematic 41
Trouble Shooting Chart 42
Warranty 44