Waterous ECLIPSE CAFSystem 2.0, Installation, Operation And Maintenance Instructions

Page: 17 / 44

Safety Introduction Product Overview Installation Operation Maintenance Troubleshooting Warranty
17 | 44
Solution Screen
Use the solution screen to adjust the foam solution parameters. Adjust the concentration percent to develop the foam characteristic desired.
Feature Description
1 Solution screen This allows you to adjust the foam parameters.
2 Total foam flowed This shows the total amount of foam produced during the current operation.
3 Foam type and status This shows the foam type and system status. Active=animated. Inactive=static
4 Total water flowed This shows the total amount of water flowed during the current operation.
5 Water flow gauge This shows the volume of water currently flowing.
6 Valve controls button This button navigates you to the valve control screen.
7 Minus (–) button This button decreases the value.
8 Foam concentrate percent This shows the percent of concentrate injected into the water flow.
9 Foam button This button enables and disables the foam system
10 Navigation button—go to eclipse screen This button navigates you to the eclipse screen.
11 Foam system active This appears when the foam system is active.
12 Screen navigation indicator This indicates your location in the menu screens.
13 Plus (+) button This button increases the value.
14 Prime button This button primes the foam pump with foam concentrate.
15 Navigation button—go to engine screen This button navigates you to the engine screen.