16
Installation & Operation Manual
Copyright © Puretec Pty Ltd 2022
Installation Procedure
Connecting the Drain Line
Locate the drain line flow controller (see page 12 for identification and attach to the
tubing (tubing not supplied) from the valve to the drain. Ensure the drain line is not
kinked. The line must not travel more than 2.4m up and no more than 6m long from
the valve, otherwise an increase of the diameter of the drain line will be required.
Connect drain and overflow to sewer or other approved salty water disposal point as
approved by your local authority.
8
Connecting the Softrol System
Connect the Softrol system to main plumbing. Do not solder brass adapters while they
are inserted in the control module.
7
FOLLOW LOCAL
PLUMBING CODES
1"DRAIN
BRINE
Summary of Contents for Puretec Commercial SOL-2CI Series
Page 36: ......
