
26
Installation & Operation Manual
Copyright © Puretec Pty Ltd 2022
Setup Programming
Press "NEXT" to go to the next step.
5.
Next Regeneration Time (hour) Preset to default to
2:00am :
Set the hour of the day for regeneration using ▲
or ▼ buttons. The default time is 2:00. This display will show
"REGEN on 0 m3" if "on 0" is selected in Set Regeneration
Time Option in Setup Programming.
Press "NEXT" to go to the next step.
6.
Next Regeneration Time (minutes):
Set the minutes of
the day for regeneration using ▲ or ▼.
This display will not be shown if "on 0" is selected in Set
Regeneration Time Option in Advanced Programming.
Press "NEXT" to exit Installer Display Settings.
User Display Settings
General Operation:
When the system is operating, one of the
following displays may be shown. Pressing "NEXT" will alternate
between the displays:
• Current Time of Day
• Days or Volume Remaining:
Days remaining is the number of
days left before the system goes through a regeneration cycle.
Capacity remaining is the cubic meters that will be treated
before the system goes through a regeneration cycle.
• Current Treated Water Flow Rate:
The current treated water
flow rate through the system.
If the system has called for a regeneration that will occur at
the present time of regeneration, the words "REGEN TODAY" will
appear on the display.
If a water meter is installed, the word "SOFTENING" flashes on the
display when water is being treated (i.e. water is flowing through
the system).
Regeneration Mode
Typically a system is set to regenerate at a time of low water
usage. An example of a time with low water usage is when a
household is asleep. If there is a demand for water when the
system is regenerating, untreated water will be used.
RETURN TO
NORMAL MODE
Summary of Contents for Puretec Commercial SOL-2CI Series
Page 36: ......